SFUMIA / Documentation
Guide
Video playback and audio analysis
Pause and step frame by frame to inspect a cut.
In this guide
Example
Distinguish a missing source frame from one not yet cached. For sound, listen to the relevant channels and analyse the complete file when measuring integrated loudness.
Play video and listen to audio
Use play, pause, frame stepping, in/out points and looping. With the Viewer active, J, K and L control transport. The cache bar shows loaded frames; missing frames remain identified.
For compatible audio, adjust listening controls and use the waveform to navigate. Audio mixing and export take place in Montage.
On-demand audio measurements
Channel analysis and LUFS/true-peak analysis inspect authorised media without changing the file or listening volume. They require compatible audio components in the installation.
A mono waveform does not show every channel difference. Silence, very short audio or interrupted analysis may not provide a usable measurement.
What the analyses measure
« Mesurer les canaux » calculates, for each channel of the first audio stream, the sample peak, the RMS level in dBFS, the DC offset and the number of full-scale samples; up to 32 channels, 384 kHz and 24 hours. Sample peaks are not true peaks and the RMS is not weighted.
« Mesurer LUFS / crête réelle » gives the integrated loudness, the loudness range (LRA) and the true peak, to two decimal places, up to eight channels (7.1) and 192 kHz, without dual-mono compensation. Below 400 ms, integrated loudness is not measured; LRA needs at least 3 seconds.
Open the intended result
You can detach the Viewer onto another screen. Files stay in your project storage.
- Open the Viewer from SFUMIA’s modules.
- Choose a project output you can access.
- Check its name, version, dimensions and frame rate before reviewing it.
Available features depend on your version and installation.